2-power 1TB M.2 SATA 2280 SSD (2P-M280CS900-1TB)

Full terabyte storage in the slim M.2 2280 format – the 2-POWER 2P-M280CS900-1TB turns an old laptop or cramped desktop into a responsive machine. No cables, no brackets, just a single slot and instant speed: boot in seconds, load games and projects without the wait. SATA III 6Gb/s keeps it compatible with virtually any motherboard from the last decade, while 3D TLC NAND delivers a solid 550 MB/s read and 500 MB/s write – enough to make everyday tasks feel snappy without the premium price of NVMe.

Why it fits your build

• 1TB capacity – room for OS, software, and a hefty media library
• M.2 2280 – the standard size for modern laptops and desktops
• SATA III – works with older systems that lack NVMe support
• 3D TLC NAND – good balance of speed, endurance, and cost
• Sequential reads up to 550 MB/s, writes up to 500 MB/s
• Reliability: 1.5 million hours MTBF and 600 TBW – built to last
• TRIM, S.M.A.R.T., and ECC keep data safe and performance steady

In real use

Swap out a slow HDD or a cramped SSD and feel the difference immediately. Programs open faster, files copy without the usual wait, and the system stays responsive even under load. The M.2 design means no extra cables – better airflow in tight cases. Power draw is low: 2.5W active, 0.3W idle, so laptops get longer battery life and stay cooler.

Key specs at a glance

• Capacity: 1TB
• Form factor: M.2 2280
• Interface: SATA III (6Gb/s)
• NAND: 3D TLC
• Sequential read: up to 550 MB/s
• Sequential write: up to 500 MB/s
• Random read (4KB): up to 90,000 IOPS
• Random write (4KB): up to 85,000 IOPS
• MTBF: 1,500,000 hours
• TBW: 600 TB
• Operating temp: 0°C to 70°C
• Storage temp: -40°C to 85°C
• Shock resistance: 1500G @ 0.5ms
• Vibration resistance: 20G Peak, 10-2000Hz
• Power consumption: 2.5W active, 0.3W idle
• TRIM, S.M.A.R.T., ECC support

Who it’s for

If you’re upgrading an older laptop or building a budget desktop, this drive gives you the most storage per euro without compatibility headaches. It’s also a solid choice for secondary storage in a gaming rig or a media server – reliable, cool, and quiet.

Tip: Before installing, check that your system’s M.2 slot supports SATA (not just NVMe) – most do, but it’s worth a quick look. After installation, enable TRIM in your OS to keep performance at its peak for years.