Ūdens tvertnes līmeņa indikators KEMO (M167N)

The KEMO level indicator shows the water level from up to 100 m in 10 steps with LEDs.

• Measuring points in the water tank: 10
• Remote measurement up to 100 m

Battery-operated level indicator for measuring the level of water tanks such as rainwater, sewage chambers or slurry tanks from distances of up to 100 metres. The display is activated by pressing a button and shows the level via 10 LEDs in steps of 10% each (display 10 - 100%). The device is suitable for wall mounting (approx. 131 x 78 x 36 mm) and requires 2 AA batteries. Connection is made via screw terminals inside the device. You need a standard signal cable (telephone cable, control cable or similar) with at least 11 cores to connect your water tank to the level indicator (cable not included). You can also use cables with fewer cores, but then not all display steps can be used (e.g. with 8 cores only 7 LED display steps can be operated, which is often sufficient).

• Extension for larger measurements

The normal application is measuring water levels in rain barrels, water tanks and similar containers. Now customers have asked about the possibility of measuring the water level in very large containers such as deep wells with measuring distances between the individual measuring electrodes of about 5 m. Because the distance from the top electrode to the ground electrode is too large in such measurements to obtain a bright display (e.g. at a water level of 40 m), we recommend in such cases not to build the ground electrode at the bottom of the well, but to install it as a long pipe parallel to the individual measuring electrodes according to the drawing.

Included in delivery

• 1x level indicator

Electrodes and other accessories not included, these must be purchased separately