Servo svira ROBITRONIC Alu 23Z, sarkana, dubultā svira (1 līmenis)

This durable aluminium servo arm features a double arm design with side screws to optimize mounting on the servo main shaft, featuring hole distances of 20 mm and 24 mm and 3 mm holes.

The red aluminium 23Z double servo arm (1 level) has small screws on the side for mounting on the servo main shaft.

The CNC-machined aluminium double servo arm is fastened to the servo with one mounting screw from above and two side hex socket screws. The side screws clamp the arm onto the output shaft, so it keeps its hold even if one screw is lost. The 100% play-free connection allows more direct linkage and relieves the gearbox.

• Specifications
• Distance Between Holes: 20 mm and 24 mm
• Hole Diameter: 3 mm

The aluminium servo arm is significantly stiffer than a plastic arm; commands are thus implemented more directly and precisely. It is also much more robust than the plastic servo arms usually installed as standard. This double servo arm is almost universally applicable, whether for steering, throttle and brake, in 1/10 or 1/8 scale.

Suitable for servos with 23-tooth spline / output shaft, e.g. from KoPropo, Sanwa, JR, Airtronic, Graupner, Multiplex and Spektrum.

• Technical Data
• Total length servo arm: 56 mm
• Total height: 7 mm
• Press-in depth for servo gear: 3 mm
• Mounting holes: M3 (2 pcs.)
• Hole spacing of mounting holes to center: 20 mm (hole 1) / 24 mm (hole 2)

In the box

• 1× Anodized double arm servo horn 23 teeth
• 2× Hexagon socket screws
• Brand: Robitronic