TP-Link JetStream 24 portu Gigabit L2 pārvaldāms komutators ar 4 SFP slotiem

When your office network starts to choke on traffic and you need real control over who gets bandwidth, the TP-Link JetStream 24-Port Gigabit L2 Managed Switch with 4 SFP Slots steps in. It's not just a dumb switch – it's a full L2+ managed unit that lets you segment VLANs, prioritize VoIP and video, and secure ports, all in a 1U rack form factor. With 24 gigabit ports and 4 SFP slots, you get plenty of copper for workstations and fiber for uplinks, plus static routing for inter-VLAN traffic without needing a router.

Who is it for

This switch is built for small to medium businesses, branch offices, and workgroups that have outgrown unmanaged gear. If you're an IT admin who needs VLAN segmentation, QoS for voice and video, and robust security without the complexity of a full Layer 3 switch, this is your sweet spot. It's also great for anyone who wants to future-proof their network with fiber uplinks.

Main advantages

• 24 Gigabit RJ45 ports plus 4 Gigabit SFP slots – mix copper and fiber to fit your layout.
• 56 Gbps switching capacity and 41.66 Mpps forwarding rate – no bottlenecks even under heavy load.
• Full L2+ feature set: 802.1Q VLAN, GVRP, STP/RSTP/MSTP, LACP link aggregation, and IGMP snooping.
• Advanced QoS with 8 priority queues, 802.1p/DSCP, and bandwidth control – keep latency-sensitive apps smooth.
• Security: ACL, port security, DoS defend, 802.1X, and password protection – lock down your network.
• Manage it your way: web GUI, CLI (console, Telnet, SSH), SNMP, and RMON for remote monitoring.
• Rack-mountable with 2 smart fans – efficient cooling, quiet operation.

Key specifications

• Switch type: L2+ Managed Gigabit Switch
• Total ports: 28 (24 RJ45 + 4 SFP)
• Switching capacity: 56 Gbps
• Packet forwarding rate: 41.66 Mpps
• MAC address table: 8K entries
• Jumbo frame support: 9 KB
• VLAN support: 802.1Q tag-based, up to 4K VLANs, GVRP
• QoS: 8 priority queues, 802.1p/DSCP, bandwidth control
• Security: ACL, port security, DoS defend, 802.1X, password protection
• Management: Web GUI, CLI (console, Telnet, SSH), SNMP v1/v2c/v3, RMON
• Layer support: Layer 2+ (static routing)
• Link aggregation: LACP (IEEE 802.3ad), up to 8 groups
• Spanning Tree: STP, RSTP, MSTP
• IGMP snooping: Yes
• Power supply: Internal, 100-240V AC, 50/60Hz
• Mounting: Rack-mountable (1U)
• Fans: 2 smart fans
• Operating temperature: 0–45 °C (32–113 °F)
• Storage temperature: -40–70 °C (-40–158 °F)
• Operating humidity: 10%–90% RH non-condensing
• Storage humidity: 5%–90% RH non-condensing
• Dimensions (W x D x H): 440 x 180 x 44 mm (17.3 x 7.1 x 1.7 in)
• Weight: 2.6 kg (5.7 lb)

How to use it

Plug in your devices, then dive into the web GUI or CLI to set up VLANs, QoS rules, and security policies. For high-bandwidth gear like NAS or servers, configure LACP link aggregation to double the throughput. Enable IGMP snooping to keep multicast traffic (like IP cameras or streaming) from flooding the network. Use static routing to route between VLANs without a separate router.

Tip: Use Cat5e or better cabling for Gigabit speeds. For security, separate guest, IoT, and management traffic into different VLANs and apply ACLs to restrict access. Keep firmware updated for the latest features and patches.